ZEST ENGINEERING G1/45A, 2 FLOOR , PHASE 1,G -BLOCK ,BUDH VIHAR NEAR RADHIKA MANDHIR NEW DELHI -110086
+91 8800445945
+91 9760158775

PADDLE WHEEL FLOW METER

ZEST is only choice for raw water application in MS pipelines with ferrus particles/rust,Featured with Stainless-steel Paddle and Non-magnetic Coupling between paddle and electronics, ZEST is most robust and advance Sensor in the family of Paddle Wheel Sensor worldwide in all INDUSTRIAL APLLICATION.

With proper installations, sensor achieves overall accuracy of +/-2% even if 10% solids are present in the fluid  sensor can be installed in wide range of pipe sizes.

Variety of materials is available in installation fittings like ABS, PVC, MS, and SS. These fittings include Tees, Saddles, with specific Weld Ends, Thread Ends or Flange Ends and Weldon Adaptor.

Features:
• Harsh Industrial applications.
• Open cell design for linear and repeatable output.
• Dynamic range with virtually no pressure drop.
• Corrosive resistant plastic for aggressive fluids
• Wide choice of installation Fittings.
• Lower installation and maintenance cost.
• Suitable for Turbid water with SS Non magnetic Paddle.

» Accuracy is +/- 5% at Low Flow i.e.0-10% of standard range & +/-s 2% is achieved between
  10-00% of Standard Flow Rate range.
» Use of filter before Flowmeter is necessary.
» Straight Run condition given in manual must be maintain while installation.

Applications:
• Water treatment
• Agriculture
• Construction
• Oil
• Power
• Textiles